Lets install a Gotek drive into a Super Nintendo Copier. The Gotek drive is a bank switching USB floppy emulator that runs floppy disk images from a USB drive. Archivists had identified the problem of media reliability long before now and have taken steps to preserve good versions of the software in digital archives (these efforts are ongoing). These archives coupled with a Gotek drive can resurrect your old software.

When we come to gaming, Copiers or Development Kits (as they were sometimes sold) have been around for years. Copiers generally made use of the most common mediums of the time; when we talk retrogaming we see many floppy drive/parallel dependant systems. The hardware itself is intriguing but from an application perspective there is nothing quite like throwing back to the existing hardware.

Gotek Drive Black
Gotek Drive Black

While the SD options exist (e.g. the EverDrive) there is nothing quite like using the same hardware solutions from back in the day.

How to setup a Gotek drive for use with a Super Wild Card

The Gotek drive can be cheaply found on eBay or other sources, you do not want the AMIGA compatible drives

Gotek Drive - gotek_superwildcard_1
Gotek Drive installed in a Super Wild Card Copier

Assumptions, you have in your possession   Start by installing the Gotek drive into the Super Wild Card (this is a drop-in operation, 5 Phillips-head screws), that is the easy bit done.   On the PC
  1. Attach USB drive to Virtualbox.
  2. Install UFDISKManager either,
  3. Open UFDISKManager. (Figure 1)
  4. Right click on the USB drive letter in UFDISKManager, select the 1st option. (Figure 2)
  5. Update the following. (Figure 3)
  6. Press OK on the warning screen. (Figure 4)
  7. The title bar will update with the floppy index currently being created. (Figure 5)
  8. Once complete you will see the right hand pane populated 100 blank floppy images. (Figure 6)
  9. Double click on the first floppy at index 000
  10. Copy your SWC file into the the explorer window. (Figure 8)
  11. Under the File menu select Save to write the floppy image. (Figure 9)
  12. Remove the USB device from the system and plug it into the Super Wild Card.
The Super Wild Card will operate normally. Change disks with the index buttons on the front plate of the Gotek unit.
Gotek Drive - VirtualBox_29_11_2015_08_41_47
Figure 1
Gotek Drive - VirtualBox_29_11_2015_11_37_28
Figure 2
Gotek Drive - VirtualBox_29_11_2015_08_42_17
Figure 3
Gotek Drive - VirtualBox_29_11_2015_08_42_30
Figure 4
Gotek Drive - VirtualBox_29_11_2015_08_42_40
Figure 5
Gotek Drive - VirtualBox_29_11_2015_08_43_00
Figure 6
Gotek Drive - VirtualBox_29_11_2015_08_43_20
Figure 7
Gotek Drive - VirtualBox_29_11_2015_08_44_06
Figure 8
Gotek Drive - VirtualBox_29_11_2015_08_44_43
Figure 9


Original article provided here was a good reference to get this up and running


Other management options exist natively for linux.


This next part took me a while to correct. It is left here for reference. IF you to use UFloppyManager instead and forget the stop the multi-floppy service your USB device will no longer work in windows. This is a potential scenario if you close the program via the X at the top right of the window prior to stopping the service.